Category - pumps
Internal Eccentric Gear Pump
Based on the “gear-in-gear” principle with only two moving parts, ensuring reliable and efficient operation for all positive displacement needs.
- Capacity: 0.48–350 m³/h
- Max. pressure: 8–20 bar
- Temperature: 200–180°C
- Viscosity: 100–250,000 SSU
Industries and Applications
The pump is supplied with a “gear-in-gear” principle and has only two moving parts.
This is the secret behind the reliable and efficient operation of all positive displacement pumps. The positive displacement of liquid is achieved by completely filling the spaces between the rotor teeth and the spaces between the gears. The only limiting factor for peak performance with these pumps, as with all rotary pumps, is that the liquid being pumped must be relatively clean.
With each revolution of the pump shaft, a certain amount of liquid enters the pump through the suction section at the inlet. The incoming liquid fills the spaces between the rotor and the free space. The crescent on the pump head divides the liquid flow as it moves smoothly toward the outlet. The idler gear, which guides the liquid between the teeth and the inner surface of the crescent, is connected to the pump housing. On the other hand, the rotor gear, which is rotated directly with the pump shaft, delivers liquid between the gear and the crescent.
V 100-2 SPHTR
This model is specially developed for temperature-sensitive liquids, and features an integrated heating jacket to maintain constant liquid temperature and prevent the liquid from solidifying during transfer.
Typical applications: Bitumen, tar, asphalt, chocolate, molasses and heavy fuel oils that require constant heat to remain fluid.
Capacity:
Up to 350 m³/h (V-series max. range).
BMF-BCF (Monoblock Gear Pumps)
A compact, space-saving monoblock gear pump for direct coupling, perfect for integrated industrial systems.
Typical applications:
Machine lubrication, small chemical dosing and coolant circulation.
Capacity: 2–70 L/min.
Max. pressure: 12 bar
MBM B Pumps Mounted on Frame
High-volume pump in "B" series mounted on a robust frame for maximum stability during high-pressure transfers.
Typical applications: Bulk transfer of petroleum, diesel, crude oil and large-scale soap production.
Capacity: 5–800 L/min.
Max. pressure: 12 bar
The wide range of applications includes:
Chemicals and pharmaceuticals: Solvents, acids, bases, alcohols and isocyanates.
Petroleum and energy: Petrol, diesel, fuel oils and crude oil.
Food and beverage: Chocolate, molasses, vegetable oils and glucose.
Heavy industry: Adhesives, epoxy resins, bitumen, tar and asphalt.
Hygiene: Surfactants, liquid detergents, soaps and additives.
MBMC BC Pumps Mounted on Frame
Specialized "BC" configuration on a frame with relief valve, optimized for medium flows requiring high consistency.
Typical applications: Adhesives, epoxy resins, surfactants and liquid detergents.
Capacity:
5–400 L/min.
Max. pressure: 12 bar
Viscosity: 1–100 cSt
IF Low Viscosity Gear Pumps
Designed with tight tolerances to handle thin liquids efficiently without the performance loss seen in standard pumps.
Typical applications:
Solvents, alcohols, petrol and light additives.
Capacity: 5–80 L/min.
Max. pressure: 25 bar
Viscosity: 1–1000 cSt
