- Main category · Main category
Industrial Valves
Valve Types from Norditec
Rotary butterfly valves
Rotary butterfly valves are often used for shutoff in piping systems. Regulation should only be considered for valve series that are documented for throttling/regulating service. Valve selection must be based on the medium, pressure, temperature, and operating conditions.
Ball Check Valves
The B20 ball valve is a manually operated, two-piece metal construction designed for high flow rates and operational reliability. Its compact and lightweight design features a blow-out proof stem and a maintenance-friendly stem seal, ensuring long-term reliability in demanding environments.
Linear Shut-off Valves
Linear shut-off valves are designed to interrupt the flow in a system using a mechanically controlled closing element, characterized by the spindle moving downwards to close the valve and upwards to open it.
Backflow prevention device
To protect drinking water against backflow or contamination, the appropriate protection method must be selected based on the risks and requirements. Refer to the broken water seal or other documented backflow prevention measures where relevant.
Check valve / non-return valve
Used to prevent unwanted backflow in the pipework system. Go to non-return valves to view suitable solutions.
Globe valves
The STP series is designed for high reliability, long-life components, and easy maintenance. The fluid volume is dimensioned to ensure operation under continuous load. Various fluid configurations are available depending on process requirements.
Slide Valves
The yeast valve is a two-way full-bore shut-off valve with a cast body, ensuring leak-free shut-off up to 10 bar in sizes up to DN250. DN300 is available in a two-piece body design up to 6 bar.
Actuators and Automation
Actuators are components for manual, pneumatic, or electric operation of compatible valves. Compatibility must be verified for the specific valve series.
Pressure Reducing Valve
The CSA XLC 310/410 is a robust, hydraulically operated pressure reducing valve (PRV) designed to provide stability and durability in demanding water supply systems. Based on the provided specifications, here is an overview of what makes this model a "workhorse" in fluid management.
Pressure relief/protection against pressure surges
Connect to approved valves or solutions for pressure relief and protection against hydraulic pressure surges where the product’s functionality has been verified.
What factors should be taken into account when selecting an industrial valve?
A valve that works well in one system may fail in another. These factors determine which type of valve, which material and which design are suitable:
Technical limits for pressure, temperature and materials vary from series to series. These are listed on the individual product page and in the manufacturer’s technical data sheet. If you are missing any of this information, we will help you to clarify it.
Function
shut-off, regulation, backflow, pressure control or automation.
Medium
clean water, wastewater, chemicals, gas, steam, foodstuffs or sludge containing solid particles.
Pressure
operating pressure, pressure class (PN) and differential pressure across the valve.
Temperature
normal operating temperature, peaking during cleaning or start-up.
Dimensions and connections
nominal diameter (DN) and whether the valve is to be flanged, threaded, welded or fitted between flanges (wafer/lug).
Materials
The housing, seat, seals and all parts in contact with the medium must be compatible with the medium.
Flow and pressure loss
how much pressure drop the system can withstand when the valve is open.
Position and direction of installation
length, weight and whether the valve should be positioned horizontally or vertically.
Operation
manual, pneumatic or electric – and what the valve should do in the event of a power or air supply failure.
Approvals
requirements for drinking water, foodstuffs, pressure-retaining equipment or potentially explosive atmospheres.
Maintenance
availability of servicing and the need for spare parts.
Industrial valves for various industries and processes
Water and drainage
Energy and hydropower
Shut-off and control in cooling water, process water and steam. The choice is determined by the pressure, temperature and dimensions of the specific plant.
HVAC and Water Supply
Pressure reduction, shut-off and protection of the drinking water network using non-return valves in accordance with NS-EN 1717.
Maritime industry
Valves for ballast water, seawater and process water. Seawater requires corrosion-resistant materials, and approvals for maritime use are determined on a series-by-series basis
Food industry
Hygienic valves that can be cleaned in-situ. Standards such as FDA, EHEDG or 3-A apply to specific ranges and must be confirmed for the valve you choose.
Chemistry and Processes
Chemistry, choice of materials and corrosion resistance are crucial. Ball valves made of acid-resistant steel and seat valves for regulation are typical solutions.
Do you need help choosing the right valve?
- The medium and any solid particles
- Function: shut-off, regulation, backflow prevention or pressure control
- Dimension (DN) and connection
- Operating pressure and temperature
- Material requirements
- Flow or pressure drop requirements
- Preferred operation: manual, pneumatic or electric
- Installation environment: indoors, outdoors, seawater or Ex zone
- Required approvals
Frequently asked questions about industrial valves
Norditec supplies butterfly valves, ball valves, gate and globe valves, knife gate valves, non-return valves, pressure-reducing valves and pressure relief valves. We also supply non-return valves with broken water seal and electric and pneumatic actuators. The valves are used in water and wastewater, the process industry, energy, the maritime industry and food production. See the valve types above, or contact us if you cannot find what you need.
Start by considering the function: should the valve shut off, regulate, prevent backflow or control the pressure? The medium, pressure, temperature, size and connection type will then determine which valve type and material are suitable. Finally, select the actuation method and any necessary approvals. If you send us the operating data, we’ll help you make the right choice. Often, the medium and function alone are enough to narrow down the options considerably.
A shut-off valve should be either fully open or fully closed, and it must seal tightly. A control valve is designed to remain in intermediate positions and regulate flow or pressure continuously. Many shut-off valves, such as gate valves, cannot withstand throttling over time: the seat wears out, and the valve may start to leak. If the valve is to be used for regulation, it should be designed for that purpose.
A non-return valve is used where the fluid is only to flow in one direction – typically on the pressure side of a pump, so that the water column does not flow back when the pump stops. It opens and closes automatically without external control. Where drinking water needs to be protected against contamination, specific requirements under NS-EN 1717 apply, and in such cases a broken water seal may be the correct solution.
A pressure-reducing valve (reduction valve) lowers the pressure to a set level and keeps it stable downstream, even if the inlet pressure and consumption vary. It is used, amongst other things, in water supply systems to protect pipework and equipment. If, on the other hand, the valve is intended to protect against excessive pressure by releasing fluid, you will need a pressure relief valve.
Yes. Butterfly valves, ball valves and gate valves can be supplied with an electric or pneumatic actuator for remote control, positioning or regulation. Norditec supplies electric actuators from AUMA. When selecting an actuator, we clarify the torque, control signal, voltage and what the valve should do in the event of a power failure. See the actuator page for series and function
It depends on the medium. Drinking water requires materials and approvals for contact with drinking water. Chemicals require materials that can withstand the medium, often acid-resistant steel or lined valve bodies. Foodstuffs require hygienic design and often FDA, EHEDG or 3-A certification. Approvals apply on a batch-by-batch basis, so please specify the requirements when requesting a quote.



