Category – Valves
Automation of industrial valves and actuators
Intelligent and robust actuator solutions for open/close, positioning, and control
- Versatility: Solutions for gate, globe, ball, and butterfly valves
- Precision: Variable speed models with a 1:10 speed control ratio
- Durability: Robust construction resistant to environmental impacts (class C5)
Operation and Troubleshooting
Manual operation: All models are equipped with a handwheel to ensure manual control is always possible during power failures or maintenance.
Configurable status: Intelligent platforms like PROFOX allow the user to configure display layouts and provide real-time diagnostic feedback through the FOX-EYE system.
Actuator SA and SAR
Actuator type SA for open-close and positioning duty is classified for class A and B or duty categories S2 – 15 min. A special version for longer run times is available for S2 – 30 min. Torque from 10 Nm to 32,000 Nm Output speeds from 4 to 180 rpm Limit and torque sensing Available with 3-phase AC, 1-phase AC, and DC motors Handwheel for manual operation
SAV and SARV variable speed actuators
With SAV .2 multi-turn actuators for open-close duty and SARV .2 for modulating duty, combined with ACV .2 actuator controls, the proven AUMA SA/SAR range is expanded with variable speed models. AUMA is a market technology leader, offering a wide 1:10 speed control ratio. Torque range from 10 Nm to 1,000 Nm Output speeds from 6 to 240 rpm Torque and limit sensing o Available with 3-phase AC motors Handwheel for manual operation
SEVEN variable speed actuator
The use of a specially developed frequency converter offers enormous advantages. Key features include speed control, resistance to voltage and frequency fluctuations, no current peaks during startup, and gentle valve operation through reduced speed at end positions. The robust design is highly resistant to environmental impacts (standard corrosivity class C5, IP67, double-sealed – protection is also ensured during commissioning) and c
PROFOX PF-M
A solution for butterfly valves, ball valves, and globe valves. Compact actuators with intelligent features as a platform concept for tailored automation solutions. Every PROFOX is equipped with a centrally located LED: FOX-EYE. It provides clear information on both actuator and valve status. The FOX-EYE display pattern can be configured by the user as required.
Explosion-proof actuators PROFOX PF-MX
Explosion-proof units must be used in plants where there is a risk of explosive atmospheres. These units are designed so they do not act as an ignition source. Design measures prevent the occurrence of ignition sparks or hot surfaces. Certification is carried out in close cooperation with national and international certification bodies.
TIGRON TR-M
TIGRON is a multi-turn actuator with a classic purpose: Automation of gate valves with or without rising stems, as well as double block and air valves. Almost unlimited stroke Rising stems are guided through the actuator's hollow shaft by multiple turns driving the stem thread. The stem protection tube protects the stem from contamination and personnel from injury.
