Single-channel centrifugal pumps.
Supplies in general, irrigation, industry, painting, several services for pure or filled liquids.
Applications
Supplies in general, irrigation, industry, paint booths, several services for clean or filled liquids.
Materials
Material selection: Bronze, stainless steel 304 or 316
Impeller: closed or slippery closed impeller
Motor type IP-55, IP-23, Atex, etc. Standard IEC
Speed 750 y 3,600 rpm
Flange DIN-2532 PN-10 or DIN-2533 DIN-PN16.
ATEX is certified.
Series ZPN-ZPS
Capacity up to 2000 m3/h
Lifting height: Up to 100 mvs
Revolutions: 750-3600 rev/min
PROPELLER PUMPS
Applications
Large supplies, current changes, industry, fisheries, clean liquid or lightly loaded.
Materials
Standard cast iron production. The alternative can be made entirely or partially in bronze, stainless steel, etc.
Motors IP-55, IP-23. Standardized IEC
Details
Speeds between 750 and 1800 rpm.
Seal with mechanical seal or soft packed gland.
Drives horizontal and vertical output below or above the motherboard.
Flanges DIN-2532 PN-10. Requirements ASI 150 Lb.
Clockwise rotation as seen from the coupling.
Applications
Water supply
Materials
Standard cast iron production.
Scooters can be delivered in several designs; Closed impeller and semi-open impeller.
IP-55 motors, IP-23, Atex, etc. Standardized IEC
Details:
Speeds between 1500 and 3600 rpm.
Temperatures to 120 °C (248 °F).
Mechanical seal
Flanges DIN-2532 PN-10 or DIN-2533 PN-16. On request ANSI 150, 300 or 600 lbs.
Clockwise rotation as seen from the coupling.
ATEX-certified production optional.
Centrifugal pumps single-channel impeller
Series ZS – ZSR
Capacity up to 400 m3/h
Lifting height: Up to 90 mvs
Split case pumps
Series ZCP
Capacity up to 30m3/h
Lifting height: Up to 110 mvs
End suction pumps
Series ZN
Capacity up to 400 m3/h
Lifting height: Up to 100 mvs
long shaft vertical pump
Series ZPJ and ZPG
Capacity up to 160 m3/h
Lifting height: Up to 400 mvs
Vertical turbine pumps
Series ZPJ and ZPG
Capacity up to 160 m3/h
Lifting height: Up to 400 mvs
Ask for mobile fire pumps
– Diesel-powered fire pumps
Fire equipment according to regulations or rules such as NFPA, CEPREVEN, UNE-EN and others of national or international scope.
UL (Underwriters Laboratories)
FM (Factory Mutual) Global
LPCB (Loss Prevention Certification Board)
NFPA 20 (National Fire Protection Association)
NS-EN 12845
Multi-stage centrifugal pumps (Multi-stage pumps)
Supply, irrigation, industry, mining, public works, diversions, water treatment plants, multiple services for clean liquids.
Applications
– Pressure increase
– Chemicals
– Hot water
- Oil and other petroleum products
Materials
Crimping iron. Option can be made entirely or partially in bronze, stainless steel, nodular, etc.
Multi-stage centrifugal pump with closed impeller can cope with contaminants
The running wheels are balanced hydraulically and statically
Motors IP-55, IP-23, Atex, etc. IEC Standard.
Specifications
Speeds between 1500 and 1800 rpm
Temperatures to 120 º C (248 º F).
Sealing with a mechanical seal or gasket.
Flange suction and discharge side university.
Flanges DIN-2533 PN-40. On request ANSI 300 or 600 Lb.
Clockwise rotation as seen from the coupling.
ATEX-certified production optional.
Water capacities
Capacity up to 1500 m3/h
Lifting height: Up to 350 mvs
Horizontal centrifugal pump /vertical
Material selection PP / PVDF
Can handle particles
Mechanical bellows seal (new generation “Self-locking” system)
– Aisi 304 spring – Seal ring in SILICON CARBIDE + CERAMIC / SILICON CARBIDE + SILICON CARBIDE
– Lip seal: VITON® or EPDM
Vertical horizontal pump MB
Capacity up to 75 m3/h
Lifting height: Up to 35 mvs
Vertical centrifugal pump IM
Capacity up to 75 m3/h
Lifting height: Up to 35 mvs
Horizontal centrifugal pump
Standing pumps
Self-priming pumps
Material selection PP / PVDF
Can handle particles
Mechanical bellows seal (new generation “Self-locking” system)
– Aisi 304 spring – Seal ring in SILICON CARBIDE + CERAMIC / SILICON CARBIDE + SILICON CARBIDE
– Lip seal: VITON® or EPDM
Normblock pumps
Capacity up to 250m3/h
Lifting height: Up to 30 mv
Self-priming pumps
Capacity up to 350m3/h
Lifting height: Up to 30 mvs
Vertical centrifugal In-Line pumps
Vertical, multi-stage centrifugal pumps from the IN-VB series are non-self-priming high-pressure pumps characterized by high efficiency and durability. Wet parts are made of AISI 304 or AISI 316 L stainless steel. The three-phase motors of ≥ 0.75 kW correspond to the energy efficiency classification IE3.
Area of use
Pressure boosting units > Water treatment > Irrigation > Fire extinguishing systems > Cooling water supply
Design
Equipped with ceramic, durable, liquid lubricated bearings. Shaft seal in the form of a mechanical seal. The pump has CE approval and complies with the latest safety regulations.
Cap.: 3.30 m3/h
Lifting height: 225 mvs
Copyright Norditec Equipments @ 2023
Fill out the form to download the file