Mag-drive centrifugal pumps series HTM PP/PVDF are made of thermoplastic materials (polypropylene and PVDF) and are suitable for highly corrosive liquids. Thanks to the innovative mag drive system, pumps model HTM PP/PVDF reduce the risk of loss and maintenance costs. The transmission of the movement takes place through magnetic joints without the use of mechanical seals. This guarantees maximum safety and efficiency.
The pumped liquid must be clean and free of solids in suspension.
DESIGN OF MAGNETIC DRIVE CENTRIFUGAL PUMPS MOD. HTM PP/PVDF
Magnetic pumps have a special sealless design that is suitable for pumping corrosive and dangerous liquids thanks to the high chemical resistance and the absence of leakage and discharge. The structure is very simple so that the pump requires very little maintenance with subsequent savings in the form of repair and spare parts costs during the pump's lifetime. The external magnet located on the drive shaft transmits the motion to the internal magnet connected to the impeller which rotates and moves the fluid through the pump.
Typical applications:
Highly corrosive liquids
Toxic, harmful and carcinogenic liquids
Chap. 138 m3/h
Max. H: 48 m (mlc- metric liquid column)
Viscosity: 2000 cP
Temp.: PP 70⁰C – PVDF 90⁰C
Max load capacity: 200cSt
System pressure: 6 bar at 20⁰C
O-rings: EPDM/VITON
Copyright Norditec Equipments @ 2023
Fill out the form to download the file