NORDITEC offers barrel pumps in different designs and finishes.

Requirements and fluids in the market could not be more different. Large quantities, high pressure, viscous liquids, chemical resistance and many more properties pose a number of challenges for the drum pump.

Drum pumps come in various designs and designs, portable units handle corrosive liquids. The impeller in the pump means that we get a constant flow.

The pumps can also be supplied with an electric motor.

Barrel pumps can be supplied in a variety of designs and finishes.

– Electric

– Pneumatic

– Battery operated

The area of use

– Industry

– Lab

Pump models:

  • Electric drive: TRA, TRF, TRP

  • Pneumatic motor: TRA, TRF, TRP

Capacities: Up to 150 l/min

Drum pump set with electric motor for highly concentrated acids and alkalis

JP-280 PVDF Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, low-voltage circuit breaker, 5 m cable with plug.

Pump hose:

PVDF outer-Ø 41 mm, HC shaft NOK 2.4610

Connecting thread G 11/4″ Hose connection 1″

(DN 25)

2 m multipurpose chemical hose 1″ (DN 25)

2 stainless steel hose clamps 1 nozzle PVDF


The JP-700 SR with PTFE stator and a special ATEX mechanical seal has type examination certificate II 1/2 G c IIA T4 and can be used for flammable liquids and in explosive environments.
DIESEL PUMP Protank 50
for replenishment of agricultural machinery, tractors, excavators, caterpillars, trucks, etc.; The pumps are not suitable for other media and therefore not for oils, gasoline or water.
Protank 50, non-self-priming pumps for hazardous class A III diesel and fuel oil in 230 V, 12 V or 24 V, IP55
• Pump: Vane pump self-priming with bypass valve.
• Construction: Rugged design that fulfills the most difficult tasks.
• Viscosity: medium/high.
• Siphon protection: Permanently effective, according to two laws.
• Delivery head: up to 6 m, up to 2 m self-priming.
• Motor protection: Overload protection of a thermal circuit breaker, self-reset.
• Action: The discharge hose can be easily disassembled from the pump.
• Material: Pump housing and cast iron impeller.
• Suction hose: Length 1.6 m, 1″, with strainer.
• Outlet hose: Length 4 m, 1″
• Nozzle: Standard nozzle or automatic nozzle included in kit.
• Flow meter: Mechanical flow meter as option depending on version, see programme.
• Package: Non-returnable package


The mobile system can be used to filter and pump particles and foreign objects from various chemicals and dyes.

The filter bag housing has a side entrance and an output at the bottom, each with a 2 inch internal thread and can be operated with up to 10 bar air pressure. The maximum volume flow is limited to a maximum of 23 m³/h.

The mobile unit consists of an air-operated double diaphragm pump and a 32-inch metal filter system made of stainless steel with a metal inner basket and 40 micron filter bags.

The membranes, seals and materials used in the diaphragm pump can be adapted specifically to the requirements of the medium to be pumped. The choice of suitable filters is as possible as the replacement of the filter housing. This enables optimal equipment for almost all applications (eg also in the food and chemical industries). The transport trolley can also be equipped with the desired material for this purpose.

Log in with the Username and Password you have been given by norditec.