The model 200 is a one-way monobloc body design gate valves are used in general industrial applications.
Applications: Pulp and paper, power generation, water and waste water, powder and bulk handling, mining, chemicals, food and drink.
Dim:
DN50- DN250 10 bar
DN300 – DN450: 6 bar
DN500-DN600: 4 bar
DN700 – DN 1600: 2 ba
The model 200 is a two-way monobloc body design gate valves are used in general industrial applications
Applications: Pulp and paper, power generation, water and waste water, bulk handling, mining, chemicals, food and drink.
Dim:
DN50- DN250 10 bar
DN300 – DN450: 6 bar
DN500-DN600: 4 bar
DN700 – DN 1600: 2 bar
Can be designed as required.
The model 200 is a two-way monobloc body design gate valves are used in general industrial applications
Applications: Pulp and paper, power generation, water and waste water, bulk handling, mining, chemicals, food and drink.
Dim:
DN50- DN250 10 bar
DN300 – DN450: 6 bar
DN500-DN600: 4 bar
DN700 – DN 1600: 2 bar
Can be designed as required.
The model 200 TAPPI is a monobloc body design full-bore “lugged” valve. Face to face dimensions and pressure rates according to MSS SP-81 and TAPPI Tis 405-8. Available in one-way and two-way versions.
Dim:
DN50- DN250 10 bar
DN300 – DN450: 6 bar
DN500-DN600: 4 bar
DN700 – DN 1600: 2 bar
Can be designed as required.
Model 700 the gate valve is a monobloc body design full-bore two-way shut-off valve, offering zero leakage shut-off up to 10 bar to size DN250. DN300 available in two-piece body version up to 6 bar.
Model 400-SILO TYPE
the gate valve is a one-way wafer monobloc valve designed for industrial general service. Mainly used in bulk handling applications, discharge of powders and solids as OFF seat position (prevents solid accumulation in the seat area). Low-pressure loading in solid discharge lines
T300 – THROUGH TUBES The 300 model is a two-way wafer-type self-cleaning gate valve with a central round shaped through-through “o”-port knife. This design ensures a truly safe and total shutdown against static and highly concentrated masses.
Applications: Pulp and paper, power generation, water and waste water, bulk handling, mining, chemicals, food and drink.
RC – ROUND SQUARE
The Square Round Wafer Butterfly Valve is a heavy duty valve design for handling difficult applications. This valve is suitable for use in recirculation applications, as trash or sand traps of pulpers, high-consistency cleaners... or as silo outlets with solids
FLANGE COUPLING
PN6/PN10/PN16/PN25/PN40
ANSI125/150
BST E / BST D
JIS 5K JIS10K
AS-2129-D/E
SIZES AND PRESSURES
DN50 to DN250: 10 bar
DN300 to DN450: 6 bar
DN500 to DN600: 4 bar
DN700 to DN1600: 2 bar
(Higher design print on request)
Density
Metal/Metal
PTFE
Water proof
MATERIALS BODY
GG25, GGG40, A216 WCB, CF8 (AISI304), CF8M (AISI316), CF3M (AISI316L), 254SMO, 654SMO, AISI310, AISI904, DUPLEX SAF2207, SAFIPERTi6, SAFIPERTi6.
SEAT EPDM, NITRILE (NBR), SILICONE, VITON, GRAPHITE, FLUCAST, PTFE.
GATE AISI304L, AISI316L, 254SMO, HARDOX, AISI310, AISI904L, DUPLEX SAF2205, SUPERDUPLEX SAF2507, AISI316Ti.
PACKAGING SYNTHETIC+PTFE, Pure PTFE, GRAPHITE, CERAMIC, Lubricated COTTON.
ACTUATORS Manual, pneumatic, hydraulic, electric, gearbox, hand lever, square end, sprocket, pneumatic with safety handwheel, pneumatic with safety gearbox.
ACCESSORIES AND EXTRA EQUIPMENT Limit switches, proximity sensors, solenoid valves, position regulator 4/20mA, sleeves, locking devices, extension, regulation v-ports, cleaning holes, hoods, etc.
Copyright Norditec Equipments @ 2023
Fill out the form to download the file