SIDEKANALBLÅSERE

Side channel compressor for pressure and vacuum

MANY MODELS – MORE THAN 50 DIFFERENT MODELS/ 0.2-40Kw

Side channel BLOWERS

In this overview you can see our standard blowers for pressure and vacuum. You can of course also order vertical designs, frequency controlled systems, ATEX versions, special coatings, various accessories.

Function:
Side channel blowers consist of an annular, split housing in which an impeller rotates. The blades, passing close to the inlet, suck the gaseous medium to be compressed into the side channel blower. The blades accelerate the gas forward and outward. The annular housing diverts the gas and returns it to the base of the following blades. Each of these spiral cycles, occurring many times during one revolution of the impeller, causes the dynamic pressure increase of the gas. At the end of the rotation, the blades push the compressed gas pulsation-free through a constricted static chamber to the outlet opening. If two ducts or impellers are connected in parallel in one unit (RIC TS series), the air volume is as high as possible. If two channels or the rotor are connected in series, a two-stage compression is achieved (RIC MD series) for the highest possible positive or negative pressure

RIC M 30 S – RIC M 120 S (14 models)

Single impeller - single step
Pressure at 50 Hz:
– Min.: 74 m³ / h Min. 150 mbar
– Max. 1022 m³ / h Max. 450 mbar

Vacuum at 50 Hz
- Min.: 74 m³ / h Min. 125 mbar
– Max. 1022 m³ / h Max. 350 mbar
Room temperature: -15 to +40 °C
Motor power: 0.37 – 15kW
Speed: 2900 rpm at 50 Hz

Directly flanged, two-pole three-phase asynchronous motor in IE2/IE3 version. Insulation class F – tropically protected and protection class IP55 with bimetallic thermal protection contact.

RIC T 150 S – RIC T 120 S (14 models)
Double impeller - single step
Pressure at 50 Hz:
– Min.: 74 m³ / h Min. 150 mbar
– Max. 1985 m³ / h Max. 400 mbar (50 Hz)
– Max. 2395 m³ / h Max. 400 mbar (60Hz)

Vacuum at 50 Hz
– Min.: 74 m³ / h Min. 125 mbar
– Max. 2395m³ / h Max. 650 mbar
Room temperature: -15 to +40 °C
Engine power: 0.37- 18.5kW
Speed: 2900 rpm at 50 Hz

Directly flanged, two-pole three-phase asynchronous motor in IE3 version.
Insulation class F – tropically protected and protection class IP55 with bimetallic thermal protection contact.

Our advantages:

Competent advice
Long life, reliable industrial quality
Continuous use
We also deliver for special applications
areas of use
Special versions (design
Special protective coatings
ATEX versions

ATEX side channel blowers

ATEX certified side channel blowers provide effective protection in areas where it is more likely (category 2G) or less likely (category 3GD).

Please ask for ATEX classification of our construction types. Our specialists are happy to advise you on your application

ATEX classification:
CE Ex II 2G c T3 (for use in zone 1)

CE Ex II 2G/3G c T3
(Installation in zone 2 with internal air/gas circulation classified as zone 1)

Aluminum housing, on request with internal coating against corrosive media. Our products are also available with impregnation, sealing, anodizing and special protective devices for aggressive gases.

Manuals are available in EN, FR, ES, IT, BP, other languages on request! Step files, CAD files are happy to be sent to you.

Help

Contact

Copyright Norditec Equipments @ 2023